PET Release Film for PCB/FPC Lamination

PET release film for PCB/FPC lamination, offering process separation and surface protection. Custom slit rolls and sheets for qualified hot-press applications.

Single Product

PET Release Film for PCB/FPC Lamination

Silicone-Coated Polyester Release Film for PCB, FPC, FCCL and Electronic Lamination Processes

Product Overview

HighTemp Material supplies PET Release Film for PCB/FPC Lamination, designed to provide a controlled separation interface during selected hot-press, adhesive lamination, and electronic material manufacturing processes.

The currently listed product construction uses a polyester (PET) film substrate with a silicone release coating. Depending on the selected grade, release characteristics can be matched to specific adhesive, resin, or laminate systems.

PET release film is available for evaluation in PCB, flexible printed circuit (FPC), flexible copper clad laminate (FCCL), and related electronic material processing applications.

As part of our broader PCB / CCL / FPC Lamination Materials portfolio, PET release film can be evaluated alongside cushion materials and specialized release films according to the customer’s lamination process.

HighTemp Material supports material sourcing, application review, precision slitting, sheet cutting, and custom converting through qualified supply and processing partners.

Key Features and Benefits

1. Controlled Release Performance

The silicone-coated surface is intended to facilitate separation between the PET film and compatible adhesive or resin-coated materials.

Release behavior depends on coating formulation, mating material, contact pressure, temperature, dwell time, and peeling conditions.

For critical applications, release force should be evaluated both before and after the intended lamination cycle.

2. Smooth Surface for Lamination

A smooth film surface can support consistent contact and separation during compatible lamination processes.

Surface quality is especially important when the release film contacts sensitive copper surfaces, adhesive layers, or flexible electronic materials.

Surface defects, particles, wrinkles, and coating transfer should be evaluated according to the finished laminate requirements.

3. Dimensional Stability Under Qualified Conditions

PET film offers useful mechanical strength and dimensional control for many industrial converting applications.

However, film shrinkage and deformation increase with temperature and mechanical stress.

The selected film must be qualified under the customer’s actual pressing temperature, pressure, dwell time, and cooling conditions.

4. Flexible Release Coating Options

Depending on supplier grade availability, single-sided and double-sided silicone release films may be evaluated.

Release force and coating configuration should be selected according to the contact materials and process sequence.

5. Custom Slitting and Sheet Cutting

PET release films can be supplied in different roll and sheet formats to match lamination equipment, panel dimensions, and production workflows.

For custom roll widths, cut-to-size sheets, and other converting requirements, explore our Precision Converting Services.

Preliminary Technical Specifications

Property Current Product Information / Confirmation Required
Base Material Polyester (PET)
Release Coating Silicone coating, subject to grade confirmation
Coating Configuration Single-sided / double-sided options to be confirmed
Listed Color Options Transparent / Blue
Listed Thickness Range 25–188 μm, subject to grade confirmation
Release Force Grade-dependent; test method required
Maximum Process Temperature To be confirmed
Maximum Pressing Pressure To be confirmed
Recommended Dwell Time To be confirmed
Thermal Shrinkage Grade-specific test data required
Silicone Transfer Application-specific validation required
Roll Width Custom slitting subject to availability
Sheet Dimensions Custom cutting available
Dimensional Tolerance Confirmed according to processing method
Documentation Subject to supplier and grade availability

Technical Note: The listed thickness and color options are based on existing product information and require confirmation against the selected material grade.

Typical Applications

PCB Lamination

PET release film may serve as a separation layer during compatible PCB lamination or secondary bonding processes.

Its suitability depends on the resin system, contact surfaces, and full pressing profile.

For pressure distribution and cushioning within suitable press stacks, customers may also evaluate our Reusable PCB/CCL Lamination Cushion Pad.

FPC Manufacturing

Flexible printed circuit manufacturing can require controlled release interfaces during adhesive bonding, coverlay processing, or related lamination operations.

The selected film should be evaluated for surface cleanliness, dimensional stability, and removal behavior.

FCCL Processing

PET release films may be used in compatible flexible copper clad laminate and adhesive-coated material manufacturing processes.

Release-force stability and coating transfer are particularly important when processing sensitive electronic materials.

Rigid-Flex and HDI Related Processes

Selected PET release film grades may be considered for compatible process steps in rigid-flex and HDI manufacturing.

However, high-temperature multilayer lamination or resin-blocking applications may require different materials.

For processes requiring specialized resin-flow control or higher-temperature release performance, explore our TPX Anti-Resin Release Film as an alternative material candidate.

Adhesive Film and Electronic Material Converting

Silicone-coated PET release films can also be evaluated as release liners or process separation materials for compatible adhesive-coated electronic films.

PET Release Film vs TPX Release Film: Which Should You Choose?

PET and TPX release films have different material characteristics and should be selected according to the actual pressing process.

Selection Factor Silicone-Coated PET Release Film TPX/PMP Release Film
Base Polymer Polyester Polymethylpentene
Release Mechanism Silicone coating Grade-dependent surface properties
Typical Role Release liner and process separation Specialized release and resin-control applications
Thermal Suitability Requires grade-specific qualification Requires grade-specific qualification
Silicone Transfer Concern Requires evaluation Depends on construction
Custom Slitting Available Available
Selection Priority Release force, cleanliness, dimensional control Thermal profile, resin behavior, dimensional stability

For high-temperature multilayer PCB pressing or blind-via resin-blocking applications, the selected release-film construction must be evaluated under actual production conditions.

How to Select PET Release Film for PCB/FPC Lamination

Step 1 — Confirm the Lamination Process

Identify whether the film is used in PCB pressing, FPC coverlay bonding, FCCL processing, adhesive film production, or another operation.

Step 2 — Provide the Temperature and Pressure Profile

Provide the peak pressing temperature, heating and cooling profile, applied pressure, dwell time, and number of thermal cycles.

Step 3 — Identify the Contact Material

Specify whether the release film contacts epoxy resin, acrylic adhesive, polyimide adhesive, copper, coverlay, or another material.

Step 4 — Define the Required Release Force

Specify the target release-force range, preferred testing method, and any requirements for stable release after thermal exposure.

Step 5 — Evaluate Cleanliness and Surface Quality

Consider silicone transfer, surface particles, residue, wrinkles, coating defects, and surface marks.

Step 6 — Review the Complete Lamination Stack

Release-film selection should also consider the cushioning materials used in the pressing stack.

For compatible applications requiring disposable pressure-distribution layers, see our PCB/FPC Lamination Cushion Paper.

Step 7 — Confirm Film Dimensions

Provide thickness, roll width, roll length, core size, sheet dimensions, and any cutting tolerances.

Common Lamination Problems and Material Selection Considerations

Problem Possible Cause Recommended Evaluation
Film sticking after pressing Incompatible coating or excessive process exposure Test release after the complete lamination cycle
Film shrinkage Excessive temperature or insufficient dimensional stability Review thermal shrinkage and alternative grades
Surface contamination Coating transfer or particle contamination Evaluate cleanliness and transfer requirements
Wrinkles during pressing Film tension, thermal deformation, or stacking conditions Review film thickness and lamination setup
Uneven release Inconsistent contact or release behavior Review coating uniformity and test conditions
Surface marks Film texture, trapped particles, or pressure distribution Evaluate film finish and press stack configuration

Custom Converting and Supply Options

HighTemp Material supports the sourcing and converting of PET release films according to customer requirements.

Available services may include:

  • Custom roll slitting
  • Cut-to-size sheets
  • Selected die-cut shapes
  • Roll length customization
  • Packaging and labeling
  • Engineering sample preparation
  • Drawing-based dimensional review

Specific capabilities, tolerances, and order quantities are confirmed before quotation.

Frequently Asked Questions

What is PET release film used for in PCB and FPC manufacturing?

PET release film is used as a separation material in compatible lamination and adhesive-processing operations. It helps facilitate removal of the process film from the contacted material after processing.

Is PET release film suitable for high-temperature PCB lamination?

Suitability depends on the PET grade, release coating, temperature, pressure, and dwell time. A specific film must be qualified before use in demanding high-temperature press cycles.

Can you supply different release-force levels?

Different release-force grades may be evaluated according to supplier availability. The required test method and target range should be confirmed before selection.

Is the release film silicone-coated?

The currently listed product is silicone-coated PET film. Coating configuration and specific grade information should be confirmed during quotation.

Can PET release film be used for HDI and rigid-flex PCB manufacturing?

It may be suitable for selected process steps, but it is not automatically suitable for every HDI or rigid-flex lamination process. Temperature, resin behavior, and cleanliness requirements must be reviewed.

Can you supply custom widths and sheets?

Yes. Custom slitting and sheet cutting can be evaluated according to material availability, required dimensions, and tolerances.

How do I choose between PET and TPX release film?

The choice depends on thermal exposure, resin compatibility, release characteristics, cleanliness, and the intended role of the film. High-temperature resin-blocking applications may require specialized materials.

What information is required for a quotation?

Please provide film thickness, roll or sheet dimensions, required release force, contact material, lamination temperature, pressure, dwell time, and estimated quantity.

Request PET Release Film Samples and Quotations

Looking for PET release film for PCB, FPC, FCCL, or electronic material lamination?

HighTemp Material can support material selection, custom roll slitting, cut-to-size sheets, and sample evaluation.

Send us your lamination conditions, required film dimensions, and release requirements for a preliminary review.

HighTemp Material Co., Ltd.

Website: https://www.hightempmaterial.com/

Request a Quote | Request Samples | Discuss Your Lamination Process

Request a Quote

Tell us what material or custom component you need. Provide as much information as possible to receive a faster and more accurate quotation.

PI tape-Request a Quote

Upload Your Drawing

Upload your drawing and application requirements for a preliminary manufacturing review. We can support custom die cutting, slitting, laminating and adhesive-backed parts.

PI pate-Upload Your Drawing

Request a Polyimide Tape Sample

Tell us about your application and testing requirements. We will recommend a suitable polyimide tape sample for evaluation.

PI tape-Request a Sample

Samples are provided for material evaluation. Shipping costs and sample availability will be confirmed after review.


Upload Your Drawings

Send your CAD files and requirements for a fast technical review.

Upload your drawings

1.Contact Information

2. Project Basics

3. Upload Files

Request a Custom Manufacturing Quote

Tell us about your project. Our engineering team will respond within 1 business day.

Request a CustomManufacturing Quote

1.Contact Information

2. Project Requirements

3. Drawings & Details