High Temperature TPX Release Film for PCB & CCL Lamination

TPX (PMP) release film for PCB, CCL and FPC lamination. Explore heat resistance, resin release, film selection and custom slit rolls or sheets.

Single Product

High Temperature TPX Release Film for PCB & CCL Lamination

High-Performance Polymethylpentene (PMP) Release Film for Electronic Lamination Processes

High Temperature TPX Release Film is a specialty polymer film designed for release and separation applications in PCB, CCL, and flexible circuit lamination processes.

Made from polymethylpentene (PMP), TPX-based release films offer a combination of low surface energy, heat resistance, and release characteristics that make them suitable for selected high-temperature resin processing applications.

At HighTemp Material, we provide TPX release film sourcing and customized film converting solutions, including roll slitting and cut-to-size sheets, subject to material availability and specification confirmation.

Key Benefits

  • Low surface energy for effective resin release
  • Heat-resistant polymer material for selected lamination processes
  • Suitable for evaluation with epoxy-based resin systems
  • Available for PCB, CCL, and FPC process development
  • Custom roll widths and sheet sizes upon request

Request a Technical Review | Request Samples | Get a Quote


Key Features and Benefits

1. Excellent Release Characteristics

TPX polymer has inherently low surface energy, making it useful for applications requiring separation from cured or partially cured resin systems.

This property can help reduce unwanted adhesion between process materials and laminated assemblies.

Actual release performance depends on resin chemistry, curing temperature, pressure, and film construction.

2. Heat Resistance for Lamination Applications

TPX is a heat-resistant polyolefin with a higher melting point than many conventional polyolefin materials.

TPX-based films can be considered for selected heated pressing and resin-curing applications. However, the maximum recommended processing temperature must be established for the specific film grade and lamination conditions.

3. Resin Separation and Surface Protection

During lamination, release film can serve as a temporary separation layer between the laminate and adjacent process materials.

Depending on the stack configuration, it may help reduce resin adhesion to tooling or process layers and support cleaner separation after pressing.

4. Conformability to Surface Features

Selected TPX film constructions may provide conformability to uneven surfaces, which can be useful in flexible circuit and related bonding applications.

The required balance between flexibility, film thickness, and deformation resistance should be evaluated for each process.

5. Customized Supply Formats

HighTemp Material supports customer-specific supply requirements, including:

  • Master rolls
  • Precision-slit rolls
  • Cut-to-size rectangular sheets
  • Custom packaging and labeling

Available dimensions and tolerances are confirmed during quotation.


Typical Product Specifications

Property Specification / Availability
Product High Temperature TPX Release Film
Polymer Polymethylpentene (PMP)
Film Construction To be confirmed by grade
Appearance Transparent or translucent, depending on grade
Thickness Subject to available grade
Thickness Tolerance To be confirmed
Maximum Processing Temperature Grade- and process-dependent
Release Characteristics Low surface energy; application testing recommended
Surface Treatment To be confirmed
Roll Width Custom slitting subject to availability
Sheet Size Custom cut-to-size
Core Diameter To be confirmed
Application PCB, CCL, FPC lamination and resin release
Documentation TDS and applicable test reports upon availability

The information above is preliminary and does not constitute a certified product specification. Final values must be confirmed against the selected commercial film grade.


Applications in PCB, CCL and FPC Manufacturing

PCB Lamination

TPX release film may be evaluated as a separation layer in selected PCB lamination processes where release from resin-containing surfaces or process tooling is required.

Copper Clad Laminate (CCL) Manufacturing

In CCL manufacturing, release films can support separation between laminated materials and adjacent process layers.

The selection should consider resin type, press temperature, pressure, curing cycle, and surface quality requirements.

Flexible Printed Circuit (FPC) Processing

TPX-based films are established candidates for selected flexible circuit processing applications, including coverlay and bonding operations.

Their release properties and ability to conform to surface features can be advantageous where complex circuit patterns are involved.

Electronic Substrate Lamination

For advanced electronic substrates, TPX release film can be considered for application trials where resin separation and process compatibility are required.

Qualification is recommended before production adoption.


How TPX Release Film Works During Lamination

During a typical lamination cycle, a release film is positioned at a designated interface within the press stack.

Its role is to help separate the laminate from adjacent process materials while accommodating the required thermal and mechanical conditions.

The exact film position varies depending on the PCB, CCL, or FPC manufacturing process.

A representative lamination process involves:

  1. Preparing the laminate materials and process stack.
  2. Positioning release film at the specified interface.
  3. Applying the required temperature and pressure.
  4. Completing the resin curing or bonding cycle.
  5. Cooling and separating the processed assembly.
  6. Inspecting the laminate surface and release performance.

Important: The final stack configuration must follow the customer’s approved process design.


TPX vs PET, PTFE and FEP Release Films

Material Main Characteristics Selection Considerations
TPX / PMP Low surface energy, heat resistance, potential conformability Film deformation and release performance under pressure
PET Dimensional stability, cost-effective film options Release coating and thermal limitations
PTFE Excellent non-stick behavior and high-temperature resistance Cost, mechanical behavior and process compatibility
FEP Heat-sealable fluoropolymer with release characteristics Softening, thermal exposure and potential adhesion

No single material is suitable for every lamination process.

The best choice depends on the operating conditions, resin chemistry, dimensional requirements, contamination controls, and total process cost.


TPX Release Film Selection Guide

When selecting TPX release film for a lamination process, we recommend confirming the following information:

Temperature Profile

Provide the maximum press temperature, heating duration, and cooling conditions.

Lamination Pressure

Specify the applied pressure and whether it is maintained throughout the heating cycle.

Resin System

Identify the resin chemistry, such as epoxy or other thermosetting systems.

Film Thickness

Select thickness according to handling requirements, surface conformability, and resistance to deformation.

Release Requirements

Describe acceptable release force, surface appearance, resin residue, and contamination limits.

Supply Dimensions

Provide the required film thickness, roll width, roll length, sheet dimensions, and estimated consumption.


Custom Slitting and Sheet Conversion

HighTemp Material supports precision converting services for industrial polymer films.

Depending on the selected TPX film grade, available services may include:

  • Roll slitting to customer-specified widths
  • Sheet cutting for lamination press dimensions
  • Custom packaging for production handling
  • Material identification and batch labeling

Please share your target dimensions, quantity, and tolerance requirements for evaluation.


Technical Documentation and Sample Evaluation

For engineering evaluation, customers may request available technical information, including:

  • Technical Data Sheet (TDS)
  • Material composition information
  • Available dimensional tolerances
  • Applicable compliance documentation
  • Relevant material or process test data

Document availability depends on the selected product grade and supply source.

We recommend sample qualification under actual production conditions before bulk purchasing.


Frequently Asked Questions

What is TPX release film made from?

TPX release film is based on polymethylpentene (PMP), a heat-resistant polyolefin known for low surface energy and release characteristics.

Is TPX release film suitable for PCB and CCL lamination?

TPX-based films can be evaluated for PCB, CCL, and FPC lamination applications. Suitability depends on the resin system, temperature, pressure, and film grade.

Can TPX release film withstand 230°C or 250°C?

The TPX polymer melting point alone does not establish the allowable processing temperature of a finished film. High-temperature suitability must be verified using grade-specific data and actual press conditions.

Is TPX release film silicone-free?

TPX polymer itself does not require silicone to provide release characteristics. However, silicone-free status for the finished commercial film must be confirmed through supplier documentation.

Can you supply customized sizes?

Custom slit rolls and cut-to-size sheets can be evaluated according to available film widths, thicknesses, and order requirements.

Can TPX film replace existing PCB lamination release materials?

Potential substitution should be assessed through comparative testing of release performance, deformation, contamination, and laminate surface quality.


Request TPX Release Film Samples or a Quotation

Looking for a TPX release film for PCB, CCL, or FPC lamination?

HighTemp Material can assist with material selection, specification review, sample evaluation, and customized film supply.

Please provide:

  • Required thickness and dimensions
  • Press temperature and pressure
  • Lamination cycle time
  • Resin system
  • Current release film or reference material
  • Estimated order quantity

Contact HighTemp Material Co., Limited

Website: https://www.hightempmaterial.com/

Request a Quote | Ask for Technical Information

Request a Quote

Tell us what material or custom component you need. Provide as much information as possible to receive a faster and more accurate quotation.

PI tape-Request a Quote

Upload Your Drawing

Upload your drawing and application requirements for a preliminary manufacturing review. We can support custom die cutting, slitting, laminating and adhesive-backed parts.

PI pate-Upload Your Drawing

Request a Polyimide Tape Sample

Tell us about your application and testing requirements. We will recommend a suitable polyimide tape sample for evaluation.

PI tape-Request a Sample

Samples are provided for material evaluation. Shipping costs and sample availability will be confirmed after review.


Upload Your Drawings

Send your CAD files and requirements for a fast technical review.

Upload your drawings

1.Contact Information

2. Project Basics

3. Upload Files

Request a Custom Manufacturing Quote

Tell us about your project. Our engineering team will respond within 1 business day.

Request a CustomManufacturing Quote

1.Contact Information

2. Project Requirements

3. Drawings & Details