Battery Insulation vs Thermal Management vs Thermal Runaway Protection Materials

Compare PET, PI, silicone pads, thermal potting compounds and ceramic-forming silicones for battery insulation, thermal management and safety.

Table of Contents

An Engineering Guide to Selecting PET, PI, Silicone and Advanced Battery Protection Materials

Battery safety is no longer just about selecting a flame-retardant material. Modern electric vehicle (EV) battery packs, energy storage systems (ESS), and power electronics require a carefully engineered combination of electrical insulation, thermal management, flame resistance, mechanical protection, and thermal runaway mitigation.

Although these functions are closely related, they are not interchangeable.

A flame-retardant PET film may provide electrical insulation and meet a specified flammability classification. A thermally conductive silicone compound can help transfer heat away from electronic components. A ceramic-forming silicone coating may provide a protective barrier during extreme thermal events.

However, none of these materials should automatically be considered a complete battery fire protection solution.

In this guide, we compare commonly used battery insulation materials, explain their different engineering functions, and discuss how manufacturers can select appropriate materials for battery modules, battery packs, and energy storage equipment.

1. Why Battery Safety Requires Different Material Functions

A modern battery pack contains battery cells, busbars, cooling systems, electronic controls, structural components, seals, and electrical connections.

Each component introduces different material requirements.

battery material functions 1

Electrical Insulation

Electrical insulation materials help prevent unintended electrical contact between conductive components.

Typical applications include:

  • Battery cell wrapping and electrical isolation
  • Busbar insulation
  • Battery module separators
  • Insulation between metal housings and electrical components
  • Die-cut insulation barriers and protective liners

Common materials include PET film, polyimide (PI) film, mica-based insulation, and selected electrical insulation laminates.

Thermal Management

Thermal management materials help control operating temperatures by transferring heat between components and cooling structures.

Applications include:

  • Battery module thermal interfaces
  • Power electronics cooling
  • Heat transfer between battery components and cooling plates
  • Thermal potting of electrical assemblies

Typical materials include thermally conductive silicone pads, gap fillers, potting compounds, and thermal interface adhesives.

Flame Resistance

Flame-resistant materials are designed to meet specified flammability performance requirements under defined testing conditions.

For example, selected PET films may achieve UL 94 VTM-0 classification, while certain thicker or differently configured materials may be evaluated under UL 94 V-0.

These classifications are not interchangeable and do not establish that a material can contain battery thermal runaway.

Thermal Runaway Protection

Thermal runaway protection involves limiting the consequences of severe battery failure, including high-temperature exposure, hot gas release, flame propagation, and heat transfer to adjacent cells.

Potential protection materials include engineered mica barriers, ceramic insulation, specialized high-temperature composites, and ceramic-forming silicone systems.

Performance must be evaluated under representative battery pack conditions.

Engineering takeaway: A material that provides excellent electrical insulation is not necessarily suitable for heat dissipation or thermal runaway containment.

2. Comparison of Battery Insulation and Thermal Protection Materials

The following table provides a functional comparison of major material categories.

MaterialPrimary FunctionTypical ApplicationsKey Selection Considerations
Flame-Retardant PET FilmElectrical insulation and specified flame resistanceCell wrapping, busbar insulation, die-cut linersThickness, dielectric strength, UL classification, traceability
Polyimide (PI) FilmHeat-resistant electrical insulationBusbars, electronic assemblies, high-temperature insulationTemperature exposure, dielectric performance, flexibility, adhesive system
Silicone Rubber PadSealing, cushioning or thermal interface, depending on gradeBattery housings, gaskets, compression interfacesCompression set, hardness, thermal conductivity, aging
Thermally Conductive Potting CompoundHeat transfer and encapsulationBattery electronics, power modules, electrical assembliesThermal conductivity, viscosity, cure, adhesion, reworkability
Ceramic-Forming SiliconeExtreme-heat barrier protectionSelected thermal runaway protection structuresCeramic formation, barrier integrity, adhesion, system testing
Mica Sheet or Mica CompositeElectrical insulation and high-temperature barrierCell separators, module barriers, protective shieldsBinder system, thickness, thermal exposure, mechanical integrity

Important: Material performance depends on the specific grade, formulation, thickness, processing conditions, and final assembly design. This table is intended for preliminary material selection, not certification or final engineering approval.

battery insulation material comparison 1

3. Flame-Retardant PET Film for Battery Electrical Insulation

Polyethylene terephthalate (PET) film is widely used in electrical insulation because of its combination of dielectric properties, mechanical strength, dimensional consistency, and converting capability.

For battery applications, flame-retardant PET grades can be particularly relevant where electrical insulation and documented flammability performance are both required.

Key Selection Criteria

Engineers should evaluate:

  • Film thickness and thickness tolerance
  • Dielectric breakdown performance
  • Operating temperature requirements
  • UL 94 classification for the exact grade and thickness
  • Mechanical flexibility and tear resistance
  • Surface characteristics and adhesive compatibility
  • Roll dimensions and converting requirements

For thin-film products, UL 94 VTM-0 may be a relevant classification.

However, the exact material designation, minimum recognized thickness, color, and certification information should be verified against the applicable UL recognition record.

A UL classification for one film grade does not automatically apply to other PET films or finished adhesive laminates.

Typical Applications

Flame-retardant PET film may be suitable for:

  • Battery cell electrical insulation
  • Battery module insulation liners
  • Die-cut electrical isolation parts
  • Busbar protection
  • Insulation between electronic assemblies and housings

For a practical example of material certification requirements, read our UL94 VTM-0 PET Film for Battery Insulation Case Study.

This project demonstrates why UL recognition, film thickness, and laboratory verification should be confirmed before material approval.

The final suitability of any PET film depends on the required temperature, electrical stress, mechanical loading, and regulatory documentation.

4. Polyimide Film for Higher-Temperature Electrical Insulation

Polyimide film is another important material for battery electrical insulation.

Compared with conventional PET films, many PI film grades provide improved resistance to elevated operating temperatures.

PI films are often considered when a design requires:

  • Electrical insulation under elevated thermal exposure
  • Thin and flexible insulation layers
  • Dimensional stability during high-temperature processing
  • Insulation around power electronics or conductive components
  • Precision die-cut insulating components

PI Film vs PET Film

PET film may offer a practical balance of cost, electrical insulation, and converting performance for applications within its specified operating range.

PI film may be preferred when higher thermal endurance is required.

However, neither PI nor PET film should be selected solely on the basis of a generic maximum temperature figure.

Designers should consider continuous exposure, peak temperature, mechanical stress, dielectric performance, and the presence of adhesives or coatings.

For a detailed introduction to thermal stability, dielectric properties, and typical applications, explore our guide: What Is Polyimide PI Film?.

You can also review our PI Kapton Film Selection Guide for additional information about film properties and selection considerations.

battery pack material layer structure 1

5. Silicone Pads, Gaskets and Thermal Interface Materials

Silicone materials can perform several different functions in battery assemblies.

It is important to distinguish ordinary silicone rubber gaskets from engineered thermal interface materials.

Silicone Gaskets and Sealing Components

Silicone rubber gaskets may be used for:

  • Battery enclosure sealing
  • Environmental protection
  • Vibration isolation
  • Compression interfaces
  • Mechanical cushioning

Their selection depends on hardness, compression set, temperature exposure, environmental resistance, and compatibility with mating surfaces.

A conventional silicone gasket should not be assumed to provide high thermal conductivity.

Thermally Conductive Silicone Pads

Specialized thermally conductive silicone pads are designed to improve heat transfer across interfaces.

Selection factors include:

  • Thermal conductivity
  • Contact resistance
  • Compression behavior
  • Required thickness
  • Electrical insulation properties
  • Long-term mechanical stability

Thermal conductivity alone does not determine actual cooling performance. Interface contact, pressure, bond-line thickness, and assembly geometry can strongly affect results.

6. What WACKER’s 2026 Silicone Developments Reveal About Battery Material Selection

wacker 2026 silicone battery technologies 1

On October 1, 2026, WACKER announced that it would showcase several silicone technologies at The Battery Show 2026.

The announcement highlights the increasing importance of combining thermal performance, manufacturing compatibility, adhesion, and battery safety considerations.

Three technologies illustrate these different material functions.

Thermally Conductive Potting Compound

WACKER described ELASTOSIL® RT 7650 TC VS A/B, a two-component silicone potting material with customizable thermal conductivity of approximately 1.2–3.0 W/m·K.

The announced formulation also emphasizes flow behavior, adhesion, and processing efficiency.

This illustrates why battery electronics manufacturers evaluate more than thermal conductivity when selecting encapsulation materials.

Flexible Ceramic-Forming Silicone Barrier

WACKER also introduced ELASTOSIL® CM 146 US A/B, a sprayable silicone barrier coating.

According to the company’s announcement, the cured material remains flexible under normal conditions and forms a hard ceramic shield when exposed to temperatures above 600°C.

This represents a different protection concept from ordinary silicone pads or electrical insulation films.

The ability to form a ceramic barrier under extreme heat does not, by itself, establish a complete battery pack’s thermal runaway resistance.

Thermally Conductive Hybrid Adhesive

Another announced product, SEMICOSIL® PE 9351 TC VS A/B, offers thermal conductivity up to 2.0 W/m·K, room-temperature curing, and a reported UL 94 V-0 classification.

The product targets changing automotive battery assembly requirements, including module-to-pack and cell-to-pack designs.

What This Means for Material Buyers

These developments reinforce an important engineering principle:

Battery material selection increasingly involves balancing electrical performance, thermal behavior, processing compatibility, mechanical reliability, and safety validation.

Rather than asking whether a material is simply “fireproof,” buyers should define the exact function and test conditions required.

Source: Wacker Chemical Corporation, October 1, 2026. Product specifications summarized from the company’s public announcement. HighTemp Material does not claim to manufacture, distribute, or supply these WACKER products.

7. Why UL 94 V-0 and VTM-0 Are Not Thermal Runaway Certifications

One of the most common misunderstandings in battery material selection is treating a flame-retardant classification as proof of thermal runaway protection.

UL 94 evaluates material flammability under specified laboratory test configurations.

UL 94 V-0 and VTM-0 apply to different specimen configurations and should not be treated as equivalent classifications.

They do not independently establish:

  • Battery pack thermal runaway containment
  • Resistance to prolonged flame impingement
  • Protection against high-temperature vent gases
  • Cell-to-cell propagation prevention
  • Complete battery system safety compliance

For this reason, material suppliers and battery manufacturers should distinguish between material-level flammability results and battery-system validation.

Where relevant, engineers should also review the applicable battery or energy storage system standards, customer specifications, and test protocols.

8. How to Select the Right Material for Your Battery Application

A practical selection process begins by defining the primary engineering requirement.

Engineering RequirementMaterials to Evaluate
Thin electrical insulationPET film, flame-retardant PET, PI film
Elevated-temperature electrical insulationPI film, selected mica composites
Battery enclosure sealingSilicone rubber gaskets
Thermal interface heat transferThermally conductive silicone pads, gap fillers
Electronic component encapsulationThermally conductive potting compounds
Severe thermal event barriersEngineered mica, ceramic composites, ceramic-forming systems
Custom electrical insulation geometryDie-cut PET, PI, mica or qualified laminates

Some applications require multiple materials working together.

For example, a battery pack may use PET film for electrical isolation, silicone gaskets for enclosure sealing, a thermal interface material for heat dissipation, and a separately validated high-temperature barrier for thermal runaway mitigation.

The best material system is therefore not necessarily a single multifunctional material.

For applications requiring high-temperature electrical insulation or engineered thermal barriers, Mica Sheet & Die Cut Mica Gasket products may be evaluated according to the required material grade, thickness, and testing conditions.

9. Engineering Checklist Before Requesting a Battery Insulation Material Quote

custom die cut battery insulation components 1

Before requesting samples or pricing, prepare the following information:

  1. Application: Cell insulation, busbar insulation, enclosure gasket, thermal interface, or barrier.
  2. Material preference: PET, PI, silicone, mica, or an alternative.
  3. Dimensions: Thickness, width, length, die-cut geometry, and tolerances.
  4. Temperature conditions: Normal operating range, processing exposure, and abnormal event requirements.
  5. Electrical requirements: Dielectric strength, insulation resistance, and relevant test conditions.
  6. Mechanical requirements: Flexibility, compression, abrasion, and assembly loading.
  7. Flammability requirements: Required classification and documentation.
  8. Adhesive requirements: Self-adhesive or non-adhesive, adhesive chemistry, and substrate compatibility.
  9. Documentation: TDS, SDS where applicable, UL recognition information, RoHS/REACH declarations, and customer-specific reports.
  10. Commercial requirements: Annual quantity, sample volume, roll format, and delivery schedule.

A well-defined specification helps suppliers evaluate feasibility and avoids selecting materials based on incomplete performance claims.

For projects requiring non-standard insulation shapes, explore our Custom Die Cutting Services.

We support drawing-based evaluation of precision-converted PET, PI, mica, and other suitable insulation materials.

10. Custom Battery Insulation Films and Die-Cut Components from HighTemp Material

HighTemp Material focuses on high-temperature electrical insulation films and custom converting solutions for industrial electronics and energy-related applications.

For battery insulation projects, our relevant product and processing categories include:

  • Flame-retardant PET insulation films
  • Polyimide electrical insulation films
  • Custom die-cut insulation components
  • Precision film slitting
  • Mica sheets and insulation gaskets
  • Application-specific material selection support

We can discuss material selection, dimensions, processing feasibility, and available documentation based on project requirements.

Our primary focus is electrical insulation materials and precision-converted components, rather than claiming that conventional insulation films or gaskets provide complete thermal runaway protection.

Request a Battery Insulation Material Quote

Are you developing an EV battery pack, energy storage module, or electrical insulation component?

Send us your material requirements, drawing, thickness, operating conditions, and estimated annual demand.

We can help review suitable insulation film options and discuss custom slitting or die-cutting requirements.

Contact HighTemp Material to discuss your project requirements.

battery pack safety protection functions 1

Frequently Asked Questions

What is the difference between battery insulation and thermal management materials?

Battery insulation materials are primarily designed to prevent unwanted electrical conduction. Thermal management materials are selected to transfer, spread, or control heat. Some specialized products can perform both functions, but each property must be verified.

Can UL94 VTM-0 PET film prevent battery thermal runaway?

No. UL 94 VTM-0 is a material flammability classification under defined test conditions. It does not demonstrate that a PET film can stop battery thermal runaway or prevent propagation between cells.

Is PI film better than PET film for battery insulation?

PI film may offer advantages in higher-temperature applications, while PET film may be a cost-effective choice where its electrical, thermal, and mechanical properties meet the design requirements. Selection depends on the application.

Are silicone rubber gaskets thermally conductive?

Not necessarily. Ordinary silicone rubber gaskets are commonly selected for sealing and cushioning. Thermally conductive silicone grades require specific formulations and verified thermal performance.

What materials are used for battery thermal runaway barriers?

Depending on the battery architecture and test requirements, designers may evaluate mica composites, ceramic materials, specialized insulation structures, and ceramic-forming silicone systems. Final performance must be validated at the relevant component or system level.

Can battery insulation films be custom die-cut?

Yes. Suitable PET, PI, and other insulation films can be slit or die-cut into application-specific shapes, subject to material characteristics, thickness, tolerances, and production feasibility.

Conclusion

Battery insulation, thermal management, flame resistance, and thermal runaway protection are different engineering functions.

WACKER’s October 2026 silicone technology announcement provides a useful example of how advanced battery materials are being developed for more specific thermal and manufacturing requirements.

For battery engineers and purchasing teams, the most effective approach is to identify the required function first, then evaluate materials using relevant technical data, certification documents, and application testing.

For projects involving electrical insulation films, flame-retardant PET, polyimide films, mica components, or custom die-cut insulation parts, HighTemp Material can support preliminary material selection and converting discussions.

Request Material Selection Support from HighTemp Material

Reference

Wacker Chemical Corporation. WACKER to Showcase Advanced Silicone Technologies for Thermal Management and Battery Safety at The Battery Show 2026. October 1, 2026.

Read the original WACKER announcement

Request a Quote

Tell us what material or custom component you need. Provide as much information as possible to receive a faster and more accurate quotation.

PI tape-Request a Quote

Upload Your Drawing

Upload your drawing and application requirements for a preliminary manufacturing review. We can support custom die cutting, slitting, laminating and adhesive-backed parts.

PI pate-Upload Your Drawing

Request a Polyimide Tape Sample

Tell us about your application and testing requirements. We will recommend a suitable polyimide tape sample for evaluation.

PI tape-Request a Sample

Samples are provided for material evaluation. Shipping costs and sample availability will be confirmed after review.


Upload Your Drawings

Send your CAD files and requirements for a fast technical review.

Upload your drawings

1.Contact Information

2. Project Basics

3. Upload Files

Request a Custom Manufacturing Quote

Tell us about your project. Our engineering team will respond within 1 business day.

Request a CustomManufacturing Quote

1.Contact Information

2. Project Requirements

3. Drawings & Details